What are the do's and don'ts of power distribution room inspections?

1. pay attention to the usual machine and equipment cleaning work because the vast majority of electric power engineering operation machine and equipment are installed in the outdoor, according to this, in the daily maintenance and maintenance, must increase the machine and equipment cleaning amplitude. Clean up the power engineering operation of machinery and equipment, according to the actual technical standards of machinery and equipment and its common problems, the selection of effective and appropriate chemicals to clean up.

2. Application of anti-corrosion countermeasures to increase the use of machinery and equipment time high and low voltage distribution room maintenance and maintenance of electrical equipment in the whole process, anti-corrosion this work, very critical, the use of electrical equipment also has an immediate danger. To carry out anti-corrosion work on electrical equipment, the main content is as follows: for the exposed electrical conductors outside the connector, to give anti-corrosion, can choose to use power engineering composite grease immediately wipe, prevent air oxidation of the connector, to ensure that the connector is applied up to dependable.

3. Avoid moisture, ensure good operation of power equipment in the high-voltage distribution room, there is high humidity, heavy moisture and many other problems, in order to do a good job of high-voltage distribution room moisture work, the following measures should be taken: First, blocking the switchgear holes as well as the cable trench, which is high-voltage distribution room cable trench, should be blocked and waterproofing countermeasures to ensure that internal and external isolation of high-voltage distribution room cable trench, to avoid high-voltage room cable trench in the accumulated water Inflow of water in the cable trench of the high-voltage room. At the same time, sealing the cable perforation of the distribution cabinet to avoid cable moisture affecting the high-voltage switchgear.

4. Develop emergency programs, enhance the daily management through routine maintenance and maintenance of power operating equipment, power companies have a general understanding of the actual operating conditions of the equipment, based on this, the equipment can be hidden or there may be fault prediction, and in advance to formulate a good targeted emergency program, to avoid the expansion of the bad influence. At the same time, the need to clearly point out the problem of the power line, for the troubleshooting of the power line to provide convenience, and constantly improve the efficiency of the work.