What is the proper way to power wash power lines?

1. Develop a cleaning plan: Before carrying out power line charged cleaning, you need to develop a cleaning plan. According to the use of the line, working conditions and the degree of environmental pollution, to determine the cleaning cycle and cleaning methods.

2. Pre-treatment work: before the start of charged cleaning, some necessary pre-treatment work needs to be carried out. First of all, need to check the insulation condition of the line and the operating status of the electrical equipment to ensure that the line works normally. Secondly, cleaning tools and equipment need to be checked and prepared to ensure their normal operation.

3. Ensure safety measures: charged cleaning is a high-risk work, and must strictly comply with the safety regulations. Operators should wear protective clothing and insulated gloves that meet the requirements to ensure their own safety. At the same time, the need to set up a warning area to ensure that the surrounding personnel will not be harmed by electric shock.

4. Cleaning process: In the beginning of the cleaning, first of all, to ensure that the line charged state, and by professional personnel to operate the cleaning equipment. Cleaning, you can use high-pressure water gun or water spray device, the water flow sprayed to the line surface, flushing dirt. Alternatively, a brushing method can be used to clean the surface of the line with a brush. Cleaning should pay attention to maintain a moderate water flow and scrubbing strength, to avoid bringing impact and damage to the line.

5. Check the cleaning effect: After completing the cleaning, you need to check the line, and assess the cleaning effect. Mainly check whether the line surface is clean, whether there is still residual dirt. If necessary, a second cleaning can be carried out.